HP ENVY x2 CTO 11t-g000 - Manual (Page 38)

Using the digital pen (select models only)
To insert the battery in the pen:
1. Unscrew the cap from the pen.
2. Insert the battery in the pen.
3. Replace the cap on the pen.
4. Turn the cap in a clockwise direction to tighten it.
The digital pen is now ready to use with your HP computer. Simply touch the tip of the pen lightly on
the screen to write text or items on the screen. To perform a right-action click, press the button on the
side of the pen when selecting an item on the screen.
To calibrate the pen and change pen settings, such as pen sensitivity, on the Start street, tap Control
Panel, tap Hardware and Sound, tap Pen and Touch, tap Calibrate the screen for pen or touch
input, and then follow the on-screen instructions.
NOTE: For regulatory and safety information, refer to the Regulatory, Safety, and Environmental
Notices on the HP computer. To access this guide, tap the HP Support Assistant app on the Start
screen, tap My computer, and then select User guides.
28 Chapter 2 Getting to know your computer