HP Deskjet 6940 User Manual
Page 69
Prepare to print
1.
Verify that the printer is turned on.
2.
Remove the Out tray, and then remove all paper from the In tray.
3.
Slide the paper-width guide all the way to the left, and then pull out the paper-length
guide.
4.
Insert one sheet, pushing it all the way into the printer until it stops.
5.
Slide the paper guides firmly against the sheet.
6.
Replace the Out tray.
Note
Before printing a tattoo, print a practice page to test the layout of the
design. The design might need to be adjusted slightly.
1.
Open the
dialog box.
2.
Click the Paper/Quality tab, and then specify the following print settings:
–
Size is: Letter or A4
–
Source is: Upper tray
–
Type is: HP CD/DVD Tattoo
Note
Selecting this paper type automatically results in a mirrored
image.
3.
Select any other print settings that you want, and then click OK.
User's guide
67