HP Slate 2 Tablet PC - Manual (Page 72)

Using Setup Utility
Changing the language of Setup Utility
The following procedure explains how to change the language of Setup Utility. If Setup Utility is not
already running, begin at step 1. If Setup Utility is already running, begin at step 3.
NOTE: An external keyboard (purchased separately) may be connected to the USB port to perform
these steps.
1. Open the Startup Menu by turning on or restarting the Slate, and then, while the hyphen is
displayed in the upper-left corner of the screen, repeatedly pressing the Volume down button (-)
on the Slate or
f10 on an external keyboard.
2. Press the Volume down button (-) on the Slate, or use the arrow keys on an external keyboard to
advance to BIOS Setup, and then select it by pressing the Home button on the Slate or
enter on
an external keyboard.
3. Press and hold the Home button and then press either the Volume up button (+) or the Volume
down button (-) on the Slate, or use the arrow keys on an external keyboard to select System
Configuration > Language.
4. Press the Volume up button (+) or Volume down button (-) on the Slate or the arrow keys on an
external keyboard to select a language, and then press the Home button on the Slate or
enter on
an external keyboard.
5. To save your changes and exit Setup Utility, tap Exit, and then tap Exit Saving Changes or use
the arrow keys on an external keyboard to select Exit > Exit Saving Changes. Then press the
Home button on the Slate or
enter on an external keyboard.
Your change goes into effect immediately.
62 Chapter 11 Setup Utility (BIOS) and System Diagnostics