HP XP External Storage Software - Manual (Page 61)

• Fibre - Local Subsystem: Displays ports in the local storage system.
• Fibre - External Subsystem: Displays ports (WWNs) in the external storage system.
• Tree
The following items are displayed in tree format. The contents displayed in the list (right of the
window) switch corresponding to the items clicked in this tree. For details, see the description
of the Path Operation list.
When you select Fibre - Local Subsystem from the drop-down list, the following items are
displayed in the tree:
• Subsystem: The root node of the Path Operation tree which is always displayed.
• Port number: The port number of the local storage system, which the port attribute is set
to External, is displayed below Subsystem.
When you select Fibre - External Subsystem from the drop-down list, the following items are
displayed in the tree:
• Product name of the external volume: The product name of the external storage system which
is connected by External Storage is displayed as a root node. The display format is Vendor
name: Product name (Serial number).
• WWN: The WWNs of the external storage system is displayed below the product name of
the external storage system.
• Pop-up menu
The Path Operation tree does not have a pop-up menu that can be displayed.
Path Operation List (When Subsystem is Clicked)
When you click Subsystem in the Path Operation tree, the external port information which is set to
the local storage system is displayed in the list.
Figure 27 Path Operation List when Subsystem is Clicked
The Path Operation list consists of:
• Port
The following items are displayed:
• Port: The external port of the local storage system.
• PLI_TOV: The wait time (in seconds) of PLOGI to the external storage system when the switch
is not connected. This value is automatically set by External Storage. You cannot change
the value.
• FLI_TOV: The wait time (in seconds) from the switch to FLOGI when the switch is connected.
This value is automatically set by External Storage. You cannot change the value.
• Margin: The additional wait time (in seconds) to FLI_TOV (FLOGI wait time) or PLI_TOV (PLOGI
wait time). This value is automatically set by External Storage. You cannot change the value.
As a result, the sum of FLI_TOV time and the margin time, or the sum of PLI_TOV time and
the margin time is set as a total wait time.
• Status: Status of the cross-subsystem path. The following table shows the displayed statuses.
XP24000 External Storage Software User’s Guide 61