HP Deskjet 842c Printer - Manual (Page 44)

44
6 Get the banner paper ready for the printer:
a. From the stack of banner paper, tear off the number of
sheets you need to print the banner. (You must have at
least five sheets in the stack.)
b. Tear off and discard the perforated strips, if there are any.
c. Fan the stack so that the pages don’t stick together in the
printer.
7 Put the paper into the lower IN tray so that the unattached
edge is at the top of the stack. Insert the stack’s top edge first
into the IN tray until it stops.
8 Slide the paper adjusters so that they fit snugly against the
edges of the paper stack.
9 Push the IN tray back in.
10 Print the banner.
You’ll notice that the printer goes through some start-up
movements before it starts printing. Also, banner printing
takes a while; it might be several minutes before you see the
results.
11 After your banner is printed, if the Resume light is
blinking, press the Resume button as many times as
needed until all the banner paper is out of the printer.
After printing, remember to:
• Click Banner Printing in the HP print settings box to clear it.
• Change the Paper Type to match whatever you will be
printing on next.
• Flip the banner switch down.
• Put paper into the IN tray.
Unattached edge