HP LeftHand P4000 Virtual SAN Appliance Software - Manual (Page 18)

Figure 5 Calculating a custom value for setting remote bandwidth
Best practice
Set the bandwidth speed the same in both directions unless you have an asymmetrical WAN link.
To set the bandwidth:
1. In the navigation window, select either the remote or primary management group.
2. Click Management Group Tasks, and then select Edit Management Group.
3. Select the remote or primary management group.
4. Click Edit Remote Bandwidth.
5. Change the bandwidth setting as desired.
Canceling a remote snapshot
When you cancel a remote snapshot that is in progress, the remote snapshot is deleted, but the
primary snapshot remains.
1. In the navigation window, select the remote snapshot.
2. Click the Remote Snapshot tab.
3. Select the remote snapshot to cancel from the list, if it is not already selected.
4. Click Remote Snapshot Tasks, and then select Cancel Remote Snapshot.
5. Click OK.
Editing a remote snapshot
To change the description and change the server assignment of a remote snapshot:
1. Log in to the management group that contains the remote snapshot.
2. Select the remote snapshot in the navigation window.
3. Click Snapshots Tasks, and then select Edit Snapshot.
4. Change the desired information, and then click OK.
Deleting a remote snapshot
CAUTION: Do not delete individual snapshots that are part of a snapshot set. To see associated
snapshots, select a snapshot, click the Details tab, and then view the Snapshot Set field. For
information about snapshot sets, see the HP P4000 SAN Solution User Guide. HP recommends
that you keep or delete all snapshots for a volume set. If you need to roll back to a snapshot, you
want to roll back each volume in the volume set to its corresponding snapshot. The system gives
you the option to automatically delete or roll back all associated volumes.
1. Log in to the management group that contains the remote snapshot.
2. Select the remote snapshot in the navigation window.
18 Using Remote Copy