S-vol path information pane, S-vol path pane, Figure 20 – HP StorageWorks XP Remote Web Console Software User Manual
Page 67
• MU: Snapshot ID
• S-Vol: S-VOL's CU and LDEV numbers
• Status: Snapshot XP pair status
• Time: Time when snapshot data is stored in the pool
• Pool used(GB): Pool capacity the S-VOL uses
• Sync.: Consistency rate of the P-VOL and S-VOL data
• CLPR(S): S-VOL's cache logical partition (CLPR)
•
Refresh button: Updates information in the Detail pane.
•
OK button: Closes the Detail pane.
S-Vol Path Information pane
1.
Display the Business Copy XP main pane.
2.
Select and right-click a Snapshot XP pair in the volume list, and select S-Vol Path. The S-Vol Path
pane appears.
Figure 20 S-Vol Path pane
•
Pair Information: The following information appears:
• Port(P): P-VOL's port ID
• G-ID(P): Group number of the P-VOL's host group or iSCSI target
• LUN(P): P-VOL's LUN
• Port(S): S-VOL's port ID
• G-ID(S): Group number of the S-VOL's host group or iSCSI target
• LUN(S): S-VOL's LUN
•
S-Vol Path Information: The following S-VOL path information for the selected Snapshot XP pair
appears:
• Port: S-VOL's port ID
• G-ID: Group number of the S-VOL's host group or iSCSI target
• LUN: S-VOL's LUN
HP StorageWorks Snapshot XP user guide
67