HP ProLiant DL380e Gen8 Server - Manual (Page 54)

Hardware options installation 54
For more information on capacitor pack cabling in different drive configurations, see "Storage cabling
(on page
83 )."
10. Install the access panel (on page 24 ).
11. Install the server into the rack (" Installing the server into the rack " on page 33 ).
12. Power up the server (on page 20 ).
Optical drive option
For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the HP Product Bulletin website (
http://www.hp.com/go/productbulletin ).
To install the component:
1. Power down the server (on page 20 ).
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
o Extend the server from the rack (on page 20 ).
o Remove the server from the rack (on page 22 ).
4. Remove the optical drive blank.