HP ProLiant SL230s Gen8 Server - Manual (Page 43)

Hardware options installation 43
o Double SFF hot-plug drive cages
— Left node
— Right node
12. Install the FBWC capacitor pack holder.
13. Connect the Mini-SAS cable to the Mini-SAS connector port 2i on the system board and the SAS
connector on the drive cage backplane.
IMPORTANT: If only one drive cage is installed, connect the longer SAS cable to the drive
backplane. This cable connector is labeled W/HDD1. Route the shorter unused cable to the side of
the tray in the cable clip.
o Single SFF hot-plug drive cage
— Left node