HP Color LaserJet 9500 Printer series - Manual (Page 122)

http://www.hp.com/support/lj9500
120 Chapter 6 – Solving problems Rev. 1.0
4 Open the lower left door.
WARNING
Avoid touching the adjacent fusing area. It can be hot.
5 If a duplexer is installed, press the green tab and slide it partially out of the
printer. Remove any jammed or damaged media from this area by pulling
the media out of the printer.
6 Lift the green tabs and remove any jammed or damaged media. Make sure
to remove all pieces of torn media.
4
5
6