HP XP Performance Advisor Software - Manual (Page 47)

–dkc <serial num> The array serial number. Not required if -list is used.
–mval <Item List> The items for which alarms are being created. This is a csv list. Not required if -list is used.
–metric <Metric
Category>
The alarm metric to watch. Not required if -list is used. Valid values are:
IO_TOTAL LDEV IO Total
IO_RAND_TOTAL LDEV IO Random Total
IO_RAND_READ LDEV IO Random Read
IO_RAND_READ_CACHE LDEV IO Random Read Cache Hits
IO_RAND_WRITE LDEV IO Random Write
IO_RAND_WRITE_CACHE LDEV IO Random Write Cache Hits
IO_SEQ_TOTAL LDEV IO Sequential Total
IO_SEQ_READ LDEV IO Sequential Read
IO_SEQ_READ_CACHE LDEV IO Sequential Read Cache Hits
IO_SEQ_WRITE LDEV IO Sequential Write
IO_SEQ_WRITE_CACHE LDEV IO Sequential Write Cache Hits
MB_TOTAL LDEV MB Total
MB_RAND_TOTAL LDEV MB Random Total
MB_RAND_READ LDEV MB Random Read
MB_RAND_WRITE LDEV MB Random Write
MB_SEQ_TOTAL LDEV MB Sequential Total
MB_SEQ_READ LDEV MB Sequential Read
MB_SEQ_WRITE LDEV MB Sequential Write
CFW_TOTAL LDEV IO type
CFW_READ LDEV IO type
CFW_READ_CACHE LDEV IO type
CFW_WRITE LDEV IO type
CFW_WRITE_CACHE LDEV IO type
DFW_COUNT LDEV IO type
DFW_NRML_COUNT LDEV IO type
DFW_SEQ_ACCESS LDEV IO type
DFW_WRITE_HITS LDEV IO type
DFW_SA_WRITE_HITS LDEV IO type
CACHEMODE_INHIBIT LDEV IO type
CACHEMODE_BYPASS LDEV IO type
PORT_IO_MAX Port Maximum IO/s
PORT_IO_MIN Port Minimum IO/s
PORT_IO_AVE Port Average IO/s
PORT_MB_MAX Port Maximum MB/s
PORT_MB_MIN Port Minimum MB/s
PORT_MB_AVE Port Average MB/s
FBUS_HI DKC Bus Utilization
FBUS_LO DKC Bus Utilization
MBUS_HI DKC Bus Utilization
MBUS_LO DKC Bus Utilization
BACKEND_SEQ_READ LDEV Backend
BACKEND_NONSEQ_READ LDEV Backend
BACKEND_WRITE LDEV Backend
THP_POOL_OCCUPANCY
SNAPSHOT_POOL_OCCUPANCY
–list Indicates that the command must list only configured alarms.
Optional arguments:
HP StorageWorks Performance Advisor XP Software command-line user interface user guide 47