HP StorageWorks XP Remote Web Console Software - Manual (Page 62)

1. Click Display Filter in the Pair Operation window.
The Display Filter dialog box is displays.
2. Select the CLPR where the volumes you want to display in the Volume List belong, and then
select the check boxes of volume type, attribute, and pair status.
3. Click OK.
The Display Filter dialog box closes and only the volumes that meet the conditions you set in
the dialog box will display in the Volume List.
The filter settings are only effective within the current XP Business Copy operations. If you switch
to another program product, or click a button on the toolbar on the Remote Web Console main
window, the settings will be reset.
Changing or Deleting the Settings in Preview List
The Preview list temporarily retains multiple operations of the same type. The setting in the Preview
list will be reflected in the storage system when you click Apply. If the specified operations complete
successfully, the Preview list will be cleared. If an error occurs during an operation, the failed
operation will remain in the Preview list with an error icon ( ) displayed on the left of the operation
name.
The setting of the Preview list can be changed or deleted only before clicking Apply. The following
procedures describe how to change and delete the Preview list setting.
Changing the Settings in Preview List
To change the settings of the Preview list:
1. Verify that the Preview list shows settings made in the Paircreate dialog box, Pairsplit dialog
box, or Pairresync dialog box.
2. Select and right-click the setting you want to change.
A menu displays.
3. Select the Modify command from the menu.
The dialog box that enables you to change the selected setting displays.
4. Change the setting and click OK.
The dialog box closes and the setting change is reflected in the Preview list.
Deleting the Settings in Preview List
To delete all of the settings in the Preview list, click the Cancel button.
To delete only some of the settings in the Preview list:
1. Select and right-click the setting that you want to delete.
A menu displays.
2. Select the Delete command from the menu.
Only the selected setting is deleted from the Preview list.
Setting or Resetting the Reserve Attribute
You set reserve attribute to the volumes when you want to make sure that you can use those volumes
for XP Business Copy S-VOLs. This section describes how to set and reset the reserve attribute.
Setting the Reserve Attribute
The Set Reserve Attribute dialog box (see Figure 30 (page 63) ) enables you to set the reserve
attribute for the SMPL volumes selected on the Pair Operation window, and reserve the volumes
as XP Business Copy S-VOLs.
62 Performing XP Business Copy Operations