HP Surestore 64 Director Switch - Manual (Page 205)

Appendix 189
Appen
d
ix
T
SNMP trap address not defined. An SNMP trap address must be defined if a community name is
defined. Define an SNMP address.
Start diagnostics failed. The test
is currently running. Diagnostics for the port was already started from the Port
Diagnostics dialog box. Informational message.
Stop diagnostics failed. The test
is already running. Diagnostics for the port was not running and the Stop was
selected on the Port Diagnostics dialog box. Diagnostics quit for
the port for some reason, but the Stop button remains enabled.
Verify port operation. Retry diagnostics for port and select Stop
from the dialog box. If problem persists, contact your service
representative.
System diagnostics can not run.
The Operational Status is
invalid. System diagnostics cannot run on switches with failed ports.
Replace failed ports.
Message Cause/Solution
The add firmware process was
aborted. User has ended the add firmware process. N/A. An
informational message.
The data collection process
failed. An error occurred in the data collection process. Contact
support personnel.
The data collection process was
aborted. User has ended the data collection process. N/A. An
informational message.
The data collection process
failed. An error occurred in the data collection process. Contact
support personnel.
The data collection process was
aborted. The director did not handle the action. Try action again. If
problem persists, contact your support representative.
The HP EFC Server is busy
processing a request from
another Product Manager The HP EFC Server could not process the current request
because it is busy handling a request from another Product
Manager. Retry the operation later. If the condition persists,
contact support personnel.
Message Cause/Solution