Managing hosts – HP ProLiant Support Pack User Manual
Page 46
HP SUM User Interface 46
Managing hosts
To add, edit, or delete hosts, click Manage Hosts. The Manage Hosts screen appears. A remote host can
be the IP address or DNS name of the following:
•
Remote server
•
Remote iLO NIC port
•
Virtual Connect Ethernet or Fibre Channel Module for c-Class BladeSystem
•
BladeSystem Onboard Administrator
NOTE:
Local hosts cannot be included in a list with remote hosts or in a group. When
selecting an iLO, iLO 2, iLO 3 for ProLiant, OA, or VC as a host, only the firmware
component for that particular hardware can be updated. The server host must be selected to
update all other firmware and software components. The iLO firmware can be updated by
either selecting the iLO or the server host.
NOTE:
An LO-100 BMC IP cannot be used as a target to update the LO-100 firmware
directly. If used, the following pop-up message displays: Could not contact host. You
can only update the LO-100 firmware when updating firmware on a 100-series server.