HP StorageWorks ESL9000 Tape Library - Manual (Page 85)

Operator Commands
85 HP StorageWorks ESL9000 Series Tape Library User Guide
Moving Cartridges
The Move Cartridge command lets you move any tape cartridge in the library to
the destination you specify. This destination can be a storage bin, a tape drive, the
load port, the gripper, or the PTM.
Note: To move a cartridge from a tape drive when auto-drive unload is disabled, issue
an Unload Drive command. (See “ Unloading a Drive ” on page 87.)
To move a cartridge:
1. From the Operator screen, press the Move Cartridge button. The control
panel displays the Control: Move Cartridge screen, with the Source input
field active (see
Figure 34 ).
Figure 34: Control: move cartridge screen
Note: Use the backspace button to erase a partial entry character by character
(1 Figure 34 ).
Backspace
Button