Credentials – HP Systems Insight Manager User Manual
Page 163
C7000 containing 15 BL servers (single sided) and 1 Double dense server = 17 servers
C7000 containing 10 Double dense servers = 20 servers
Therefore with number of servers exceeding the number of available slots, the B side of each blade
beyond the 8th double dense blade or beyond the 16th blade will be missing from HP SIM. The
servers can still be discovered, but they will not be associated with the enclosure or will not be
shown in enclosure container view
-------------------------------------------------------------
The table view of a rack appears empty but the container view has a rack diagram.
Solution: This error can happen if you unplug the power supply and then plug it back in. Therefore,
you must re-run discovery.
-------------------------------------------------------------
HP ProLiant BL e-Class blade servers or the HP bc1000 blade PC container view is empty but the
table view displays all blades correctly.
Solution: This happens when the Integrated Administrator is discovered before blades are
discovered. Therefore, run identification on the Integrated Administrator management processor.
1.
Select Options
→Identify Systems.
2.
Select the ProLiant BL e-Class Integrated Administrator.
3.
Click Run Now.
Credentials
If you have problems where credentials are not being saved in Systems Insight Manager on a
Firefox system, HP recommends you use latest version available of Firefox. Reference:
-------------------------------------------------------------
When more than one credential is not specified on the Edit System Credentials page, ESXi 5.0 will
be discovered with multiple WBEM credentials.
•
If an ESX system is in lock down mode enabled, Sign-In and WBEM credentials will be masked
on the System Credentials page.
•
If an ESX system is in lock down mode enabled, Sign-In and WBEM credentials will be masked
under view all System Credentials page.
•
If an ESX system is in lock down mode enabled, Sign-In and WBEM credentials will be disabled
for editing on the System Credentials page..
-------------------------------------------------------------
For HP SIM to set the sign-in credentials for a system after successful discovery, be sure the following
settings are made:
•
If the system that is being discovered only supports WBEM/WMI protocols apart from SNMP;
for example, Windows systems, then for HP SIM to set Sign-in credentials, enter the
WBEM/WMI credentials under the Sign-in credentials tab. Do not enter the credentials under
the WBEM/WMI credentials tab in the discovery task.
•
If the system that is being discovered supports multiple protocols apart from SNMP, like WBEM
and SSH, be sure either the SSH or WBEM credentials are entered under the Sign-in credentials
tab in the discovery task.
-------------------------------------------------------------
If you delete a credential (system credential, global credential, or one configured with a discovery
task) while discovery or identification is running, and that credential is found to work with a system,
the attempt to write the working credential to the database fails because the original credential
has been removed. If you try to view System Credentials for such a system, the system will not be
listed in the Credentials that are in use table, or the table includes No data available. Normally,
Credentials 163