HP ENVY Spectre XT Ultrabook CTO 13t-2000 - Manual (Page 69)

Password Function
Administrator password ● Must be entered each time you access Setup Utility
(BIOS).
● If you forget your administrator password, you cannot
access Setup Utility (BIOS).
NOTE: The administrator password can be used in place of
the power-on password.
NOTE: Your administrator password is not interchangeable
with an administrator password set in Windows, nor is it
displayed as it is set, entered, changed, or deleted.
NOTE: If you enter the power-on password at the first
password check before the “Press the ESC key for Startup
Menu” message is displayed, you must enter the
administrator password to access Setup Utility (BIOS).
Power-on password ● Must be entered each time you turn on or restart the
computer, or exit Hibernation.
● If you forget your power-on password, you cannot turn
on or restart the computer, or exit Hibernation.
NOTE: The administrator password can be used in place of
the power-on password.
NOTE: A power-on password is not displayed as it is set,
entered, changed, or deleted.
TPM Embedded Security Device (select models only) Available/Hidden
● If the administrator password is set, you can select
Available.
● If you select Hidden, the TPM device is not visible in
the operating system.
TPM Status (select models only) Enabled/disabled
● If the administrator password is not set or if the TPM
Security Device is set to Hidden, this entry is hidden.
● This value reflects the current physical state for the
TPM. The state is enabled or disabled by the
Embedded Security State setting.
Using passwords 59