Aligning the printheads – HP DesignJet 500 User Manual
Page 92
Advertising
Aligning the Printheads
The printhead alignment selection causes the printer
to align the printheads immediately, or if an image is
being printed, as soon as the current print job is
finished. The alignment procedure requires a
minimum media size of A1/D-size (24 inches).
The printer will automatically perform an alignment
when printheads are replaced. You can use this
feature if the print quality print indicates an alignment
error. Refer to
Click on this
icon to run the animation
sequence.
A
printable version
of the sequence is also available
so that you can take the key illustrations to the printer,
if it is remote from your computer.
Advertising