HP SN6000 Fibre Channel Switch - Manual (Page 77)

HP StorageWorks SN6000 Fibre Channel Switch QuickTools Switch Management User Guide 77
Failed, note the Test Fault Code displayed in the Switch Information data window and contact Tech
Support.
Archiving a switch
You can create an .XML archive file containing the configuration parameters. This archive file can be used
to restore the configuration on the same switch or on a replacement switch. You can also use the archive
file as a template for configuring new switches to add to a fabric.
Basically any data received by QuickTools is archived. Passwords are not archived. Security Group secrets
are not included in the archive and must be re-configured using the CLI after a restore.
Archived parameters include:
• Switch properties and statistics
• IP configuration
• SNMP configuration
• Port properties and statistics
• Name server
• Date/Time and NTP settings
• Alarm configuration
• Zoning configuration
• Nicknames configuration
• Call Home parameters
• User account information (but not restored)
• Configured security (available only with SSL connection to the switch).
• RADIUS Server information (available only with SSL connection to the switch)
NOTE: Security features must be configured using the CLI. See the HP StorageWorks SN6000 Fibre
Channel Switch Command Line Interface Guide for information about the command line interface.
To archive a switch:
1. Select Switch > Archive.
2. In the Save dialog box, enter a file name.
3. Click Save.
Restoring a switch
Restoring a switch loads the archived switch configuration parameters to the switch. The administrative
state of the switch must be set to Offline using the Switch Properties dialog box before an archive can be
used in the restore process. The switch type archive must be compatible with the switch to be restored. See
” Archiving a switch ” on page 77 for more information.