HP ProLiant DL360 G5 Server User Manual
Page 60
Hardware options installation 60
CAUTION: When routing cables, always be sure that the cables are not in a position where they can be
pinched or crimped.
7.
Install fan modules 1 and 2 ("
Remove and install a fan module
8.
Install the air baffle.
9.
Install the access panel (on page
10.
Slide the server into the rack.
11.
Power up the server (on page
Using a PCI SAS or SATA array controller to support six hard drives
1.
Power down the server (on page
2.
Extend the server from the rack (on page
3.
Remove the access panel (on page
4.
Remove the power supply air baffle
" on page
5.
Remove fan modules 1 and 2 ("
Remove and install a fan module
" on page
6.
Disconnect all cables from the currently-installed HP Smart Array E200i Controller or HP Smart Array
P400i Controller.