Innovate Motorsports OT-2 - Manual (Page 14)

3. Select “Connect”, either the leftmost icon on the toolbar (it is supposed to be a male and
female socket with arrows in both directions below) or select “Connect” from the “File”
menu. A box like this should appear:
The ‘combo box’ will also show any COM ports that you have attached to your computer. If you
are connected via Wi-Fi, select “Innovate Network Device” (like above). If you are connected via
USB, select “Innovate USB Device”. In both cases, finish by pressing the “Connect” button.
Please note, if the correct option is not present, you need to check your network or USB
connection to the device. The options are only presented when the software has already found a
suitable device using that type of connection.
After you select “Connect” you will be presented with a “Wizard” for configuring the channels. You
can just press next/accept (the Wizard can be re-run later).
Lastly, click “Auto define” if you get the ‘No gauges defined’ dialog box.