Axis Communications 660 - Manual (Page 2)

AXIS 560/660 User’s Guide Read me First 1
Ne
tW
ar
e
UN
IX
Wi
n
d
ow
s
OS
/2
Ma
ci
ntosh
Read me First
To get your print server quickly up and running, follow the instructions below:
1. Connect the AXIS 560/660 to your network and to your printer as described in
Connecting the printer to the Network, on page 7.
2. Proceed to the setup sections that are relevant to your network environment, as
described in the table below:
Management and Configuration
The tools that you should use to configure and manage the AXIS 560/660 are
presented in Management and Configuration, on page 23.
Environment Network Configuration Action
NetWare
NDPS (Pure IP)
See Assigning an IP Address, on page 8
Proceed with NetWare Using NDPS over IP, on page 10
NDPS (IPX) See NetWare Using NDPS over IPX, on page 11
Queue-based NetWare (Pure
IP)
See Assigning an IP Address, on page 8
Proceed with Queue-based NetWare Printing (Pure IP), on page
12
Queue-based NetWare (IPX) See Queue-based NetWare Printing (IPX), on page 13
Windows 95/98
& NT
TCP/IP See Setup for Windows 95/98 & NT, on page 14
NetBIOS/NetBEUI See Setup for Windows 95/98 & NT, on page 14
Windows
3.1/WfW
TCP/IP
See Assigning an IP Address, on page 8
Proceed with Setup for Windows 3.1 & WfW, on page 16
NetBIOS/NetBEUI See Setup for Windows 3.1 & WfW, on page 16
OS/2
TCP/IP
See Assigning an IP Address, on page 8
Proceed with Setup for OS/2, on page 18
NetBIOS/NetBEUI See Setup for OS/2, on page 18
Macintosh AppleTalk See Setup for Macintosh, on page 19
UNIX TCP/IP
See Assigning an IP Address, on page 8
Proceed with Setup for UNIX, on page 21
Internet Printing IPP See Using IPP, on page 22