Monoprice 6660 8-channel Security DVR - Manual (Page 29)

29
Installation and user manual
③ Motion Area
Define the motion detection area.
To setup the motion detection grid per channel select the “Sel” button
The detection area is divided into a grid of 11x9(PAL) / 11x8(NTSC) cells. Default is all cells
in active mode.
Use the Left/ right/ up/ down btton to move cursor and the Select key to toggle between
active and inactive.
The mouse can also be used to select cells and toggle them on and off.
Care must be taken in setting of the motion sensitivity. It is recommended that each level is
tested to find out which one suits that particular camera site.
The motion detection is not recommended for external cameras.
④ Alarm (Sensor)
There are 16 Alarm inputs on the rear of the unit.
Associate each sensor with the camera channels.
⑤ Video Loss
Select a channel to report video loss on.
[ Action ]
① ② ③