Maxsa Innovations Solar-Powered LED Security Spotlight - Manual

Model #: 44311
solar-powered
LED SECURITY SPOTLIGHT
ASSEMBLY & OPERATING INSTRUCTIONS
ABOUT YOUR SOLAR POWERED LED SECURITY SPOTLIGHT
During the day, the solar panel included with this MAXSA Solar Security Spotlight converts sunlight into
electricity, recharging the pre-installed batteries. Using this stored energy, the two, super-bright LEDs turn
on automatically at night when motion is detected. These LEDs have an estimated life of 30,000 hours so
they should not need to be changed.
This Solar Powered LED Security Spotlight has an adjustable TIME dial that allows light duration of up to 60
seconds. When the batteries are fully charged, this Solar Security Light can light up for up to 120 minutes,
which is equivalent to 120 one-minute cycles when the TIME dial is set to the maximum (+) position.
The Solar Powered LED Security Spotlight has a built-in motion sensor, which automatically turns on the
light when movement of a heat source (such as people, animals, or cars) is detected in the area. The light
remains on while motion continues to be detected in the area.
The Solar Powered LED Security Spotlight has a LUX setting which can be adjusted to control the functioning
of the built-in photosensor so that the light only turns on at night.
The batteries included in this unit are 3 AA rechargeable batteries and will need to be replaced when the
charging ability is decreased. The batteries should last for approximately 3 years before they will need to be
replaced. The shorter the time period used, the longer the battery will last. The Solar Powered LED Security
Spotlight may function irregularly or not at all at temperatures near or below freezing (32˚ F/0˚ C) due to
the functionality of Ni-MH rechargeable batteries. Normal operation will return when the temperature rises.