Vaisala AWS330 - Manual (Page 103)

Chapter 4 _______________________________________________________________ Installation
VAISALA ______________________________________________________________________ 101
Connecting Battery Cables
To connect the battery cables, proceed as follows:
1. Connect the red wires to the + poles. (Battery fuse 6.3 A is within
the battery switch assembly.)
2. Connect the black wires to the - poles.
3. If solar panel is used, connect the solar panel cable to the Solar
Panel connector on the bottom of the enclosure; see Figure 51 on
page 95.
WARNING Connect the + poles first to avoid short-circuiting and injury to
personnel.
CAUTION Check the battery wiring carefully; refer to Table 19 below.
Table 19 Battery Wiring
Battery Cable Battery Function
Red
+ Positive pole +12 V
Black - Negative pole (GND)
WARNING The equipment shall be preceded by a separately approved Circuit
Breaker with rating ≤16 A due to the rating of the appliance coupler.