Vaisala vNet PoE Network Interface - Manual (Page 36)

30 VAISALA
The restart process takes approximately 15 seconds to complete.
During this time the vNet Device is unavailable. The vNet
Configuration and Management interface takes about 1 minute to
reload after restarting.
Important: Restarting the vNet Device will disconnect all con-
nected clients and close their sessions. Closing a
connection to a client disrupts communication
between the client and the Logger that is attached
to the vNet Device.
You can restart the vNet Device from the vNet Configuration and
Management interface or from the vNet Device itself.
To restart the vNet Device using the Web interface:
1
From the vNet Configuration and Management interface,
choose
Utilities | Restart Device
.
2
From the Restart Device screen, click
Restart
.
3
At the Restart prompt, click
Yes
.
To manually restart the vNet Device:
 On the vNet Device itself, press and immediately release the
restart button (refer to Figure
3, “Restart button on vNet
Device”.)
Important: Do not press the restart button for more than one
(1) second, or you might restore all settings to
their factory default values.
Figure 3: Restart button on vNet Device