Clearing logger samples – Vaisala vLog 4.5 User Manual
Page 50
Configuring Loggers
44
©
2011 Vaisala Canada Inc
3
From the Setup Thermocouple Channel screen, select
Channel Enabled
.
4
From the Display Method list, choose your thermocouple
type.
5
Enter a description.
6
Advanced: If your installation includes very long
thermocouple cables, Vaisala Canada Inc may
recommend you specify a temperature offset. Enter it
here. All values will be adjusted by this offset.
7
Click
OK
to save or
Cancel
to close without saving.
Clearing Logger Samples
Clearing a logger deletes all recorded samples in a logger’s
memory.
You can clear the logger without making any setup changes,
or as an essential part of the following logger setup functions:
• enabling or disabling channels
• changing
Start Mode
settings
• changing logger sample intervals
Note:
You do not have to clear the logger samples
before you start a new logging session, but doing
so minimizes the storage of unneeded informa-
tion.