Device address (?), Acknowledge active command (a), Device address (?) acknowledge active command (a) – Vaisala WXT520 User Manual
Page 73
Chapter 7 __________________________________________________ Getting the Data Messages
VAISALA_______________________________________________________________________ 71
Device Address (?)
This command is used to query the address of the device on the bus.
Command format: ?<cr><lf>
The response:
b<cr><lf>
Example:
?<cr><lf>
0<cr><lf>
If more than one transmitter is connected to the bus, see
. If you need to change the device address, see
Changing the Communication Settings (aXU) on page 63
Acknowledge Active Command (a)
This command is used to ensure that a device is responding to a data
recorder or another device. It asks a device to acknowledge its presence
on the bus.
Command format: a<cr><lf>
where
?
=
Device address query command
<cr><lf>
=
Command terminator
where
b
=
Device address (default = 0)
<cr><lf>
=
Response terminator.
where
a
=
Device address
<cr><lf>
=
Command terminator