VHT Special 6 Head - Manual (Page 3)

Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this amplifier near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from
the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Unplug this amplifier during lightning storms or when unused for long periods of time.
13) Refer all servicing to qualified service personnel. Servicing is required when the amplifier has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects have fallen into the amplifier, the amplifier has been exposed to rain or
moisture, does not operate normally, or has been dropped.
14) The amplifier shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the
amplifier.
15) This amplifier shall be connected to a mains socket outlet with a protective earthing connection.
16) The power/mains plug or amplifier coupler is the disconnect device which must remain readily operable.
WARNING To reduce the risk of fire or electric shock, do not expose this amplifier to rain or moisture.
Panel Functions
(Please refer to Fig. 1 and Fig. 2 for details.)
A. THE FRONT PANEL
Fig. 1: The Front Panel
1. Power Toggle Switch: Use this switch to turn the amplifier on or off.
2. High/Low Power and Standby switch: This switch reduces the amplifier’s maximum output power when in Low-Power mode; it
preserves the amp’s lively dynamic response when playing at lower volume levels. The middle postion is Standby mode.
3. Jewel Light: This light will be illuminated when the Power switch is in the upward position (Power On); the jewel light will be off when the
switch is in the downward position (Power Off).
1 2
3
4 5 6 8 7
4 5
VHT 36W Handwired Head • Manual
4