Videoswitch VDC - Manual (Page 6)

VDC Digital Recorder
Vdc601c.doc
2
1.1 Connecting Up
MAINS POWER INPUT
ETHERNET (OPTION)
PSTN or ISDN (OPTION)
ALARMS
REMOTE KEYBOARD
MONITOR OUTPUT
CAMERA INPUTS
MAINS VOLTAGE SELECT
• Connect the video input of the Monitor to the monitor output of the VDC using a BNC cable
• Make sure that the monitor termination is switched on (i.e. to 75 Ohms)
• Connect the first camera to Camera Input 1 on the VDC using a BNC cable
• Connect the next camera to Camera Input 2 on the VDC using a BNC cable
• Connect the next camera to Camera Input 3 on the VDC using a BNC cable
• Connect the next camera to Camera Input 4 on the VDC using a BNC cable
• Make sure that the voltage select switch is set to suit the mains supply voltage prior to applying
power otherwise damage may occur. The setting required in UK and Europe is 230Vac.
• Connect the mains power using the IEC cable supplied using an IEC to 13A plug cable (provided)
• When power is applied, the system will perform a self-test prior to displaying live images.