Videoswitch CMOR D2 Dome - Manual (Page 17)

CMOR Dome
Videoswitch Page 14 Vc601i.doc
2.3 Attaching the CMOR Dome
• Fully loosen the locking ring (C) by rotating clockwise until it nearly touches the top
of the dome
• Lift the dome (taking care not to lift it using lamps) and place the dome support plate
(A) onto the dome support cradle (B). Note that the curved side of the support plate
goes to the back.
• Rotate the locking ring (C) counter-clockwise to lock the dome firmly in position.
2.4 Attaching the umbilical cable
• Plug the waterproof connector on the umbilical cable into the top of the dome
• Turn the locking ring (A) clockwise to secure the connector