Videoswitch VK-2 - Manual (Page 14)

VK-2 Universal Keyboard
VK-2 Universal Keyboard User Manual
11
Connect the VK-2 to the DVR as for normal control. Add an additional control cable between RJ45
connector that is above the keyboard connector on the VDC and the keyboard loop “
IN” connector on the
VK-2. Note that the cable should be wired as follows::
VDC/Vi200 VK-2
Pin1----------------------Pin2
Pin2----------------------Pin1
Pin5----------------------Pin5
1.5.10 Storing Configuration
To exit
Configuration Mode, Holding the ALT key on, press the CONFIG key. The word “Sto” will be
displayed, indicating that the configuration is being stored.