Dake Model E-V Series - Manual (Page 2)

7/21/08
Manual V-16, V-24, VH-24, V-40 & VH-40
2 – Section I
If machine is to be operated
At 440 volt 3 phase power, please
read the following warning.
FOREWORD
These instructions cover the installation and operation of vertical band saws. Attention
to maintenance and service will afford many years of trouble free operation. We suggest that
these instructions be retained by the department or individual responsible for the machine and
kept in a readily accessible location for reference purposes.
WARNING!
This machine must be wired by a qualified
electrician. Do not connect 440-volt power directly
to this machine. You must use the optional step
down transformer (part no 300674) available at
Dake. Failure to do so may affect warranty, if
damage occurs from improper wiring.