Dake Euromatic Series - Manual (Page 3)

370 S 370 S L 370 PP 370 PP L 3
EUROMATIC 370 PP AUTOMATIC & SEMI-AUTOMATIC
Specifications and Capacities
TECHNICAL DATA 4-5
Unpacking and Installation
UNPACKING THE MACHINE 6
LIFTING THE MACHINE 6
BLADE INSTALLATION 7-8
9-10
Getting to Know the Control Panel
THE CONTROL PANEL FOR S MODEL 9
THE CONTROL PANEL FOR PP MODEL 10
Blade Selection, Speeds and Feeds
BLADE SELLECTION FOR FERROUS 11
HOW TO USE YOUR SAW PITCH CALCULATOR 13
BLADE SELECTION FOR NON-FERROUS 13
Set Up Parameters
SETTING THE HEAD PARAMETERS 15
SETTING UP THE VISES FOR CLAMPING 16
SEMI-AUTOMATIC CUTTING 370PP/S 17
VISE ADJUSTMENT FOR MITER CUTTING 18
VERTICAL HOLD DOWN VISE 19-20
HEAD DOWN FEED REGULATOR 21
BLADE PROTECTION DEVICE SET UP AND FEATURES 21
BLADE PROTECTION CALIBRATION 22-23
DRO Set Up (PP Models)
SETTING CUTTING LENGTH W / DRO 24-25
PROGRAMMING FOR MULTIPLE INDEXING 25-26
SETTING THE PIECE COUNTER 27
Operational and Cutting Tips
CUTTING TIPS 27-28
HEAD CHANGING INSTRUCTIONS 30-33
Gib Block Adjustment
GIB ADJUSTMENT 34
Maintenance Schedule
MAINTENANCE SCHEDULE FOR FEROUS HEAD 35
MAINTENANCE SCHEDULE FOR NON-FEROUS HEAD 36
Trouble Shooting Matrix
PROBLEMS, THINGS TO CHECK, SOLUTIONS 37
Technical Data Ferrous