Martin Sprocket & Gear Screw Conveyor Safety - Manual (Page 7)

CEMA STANDARD NO: 352-2012
CEMA Document: SC 2004-01
The CEMA safety labels shown below should be used on screw conveyors, drag conveyors, and bucket elevators. Safety
labels should be placed on inlets, discharges, troughs, covers, inspection doors & drive guards. See CEMA Safety Label
Placement Guidelines on CEMA Web Site: http://www.cemanet.org
Exposed buckets and
moving parts can
cause severe injury
LOCK OUT POWER
before removing
cover or servicing
CVS930012
CHR930001
Exposed moving
parts can cause
severe injury
LOCK OUT POWER
before removing
guard
CHS991026
Walking or standing on
conveyor covers or
gratings can cause
severe injury
STAY OFF
WARNING
Exposed screw and
moving parts can cause
severe injury
LOCK OUT POWER
before removing
cover or servicing
CHR930011
Exposed conveyors
and moving parts
can cause severe
injury
LOCK OUT POWER
before removing
cover or servicing
CVS930010
Exposed screw and
moving parts can
cause severe injury
LOCK OUT POWER
before removing
cover or servicing
CVS930011
PROMINENTLY DISPLAY THESE SAFETY LABELS
ON INSTALLED EQUIPMENT
SEE PREVIOUS PAGE FOR SAFETY REMINDERS
Note: Labels alone do not substitute for a thorough in-plant safety
training program centered on the hazards associated with
operating your installed equipment.
Contact CEMA or Your Equipment Manufacturer for Replacement
Labels
CONVEYOR EQUIPMENT MANUFACTURERS ASSOCIATION
5624 Strand Court, Suite 2., Naples, Florida 34110
239-514-3441
http://www.cemanet.org
CEMA Safety Labels
3.
http://www.cemanet.org
http://www.cemanet.org
http://www.cemanet.org
http://www.cemanet.org http://www.cemanet.org
http://www.cemanet.org
http://www.cemanet.org
http://www.cemanet.org