Videotec HTG - Manual (Page 5)

EN - English - I
nstruc
tions manual
3
1 About this manual
Before installing and using this unit, please read this
manual carefully. Be sure to keep it handy for later
reference.
1.1 Typographical conventions
g g DANGER!
High level hazard.
Risk of electric shock. Disconnect the
power supply before proceeding with any
operation, unless indicated otherwise.
g h WARNING!
Medium level hazard.
This operation is very important for the
system to function properly. Please read
the procedure described very carefully and
carry it out as instructed.
g j INFO
Description of system specifications.
We recommend reading this part carefully
in order to understand the subsequent
stages.
2 Notes on copyright and
information on trademarks
The quoted names of products or companies are
trademarks or registered trademarks.
3 Safety rules
g h The manufacturer declines all responsibility
for any damage caused by an improper use
of the appliances mentioned in this manual.
Furthermore, the manufacturer reserves
the right to modify its contents without any
prior notice. The documentation contained
in this manual has been collected with great
care, the manufacturer, however, cannot
take any liability for its use. The same thing
can be said for any person or company
involved in the creation and production of
this manual.
• The device must be installed only and exclusively
by qualified technical personnel.
• Before any technical work on the appliance,
disconnect the power supply.
• Do not use power supply cables that seem worn
or old.
• Never, under any circumstances, make any
changes or connections that are not shown in
this handbook: improper use of the appliance
can cause serious hazards, risking the safety of
personnel and of the installation.
• Use only original spare parts. Not original spare
parts could cause fire, electrical discharge or other
hazards.
• Before proceeding with installation check the
supplied material to make sure it corresponds
to the order specification by examining the
identification labels ("4.2 Product markings", page 3).
4 Identification
4.1 Product description and type
designation
The HTG housing is a weatherproof housing for
outdoor installations, equipped with a Germanium
viewing window designed for Thermal Imaging
Cameras installations. The clear Germanium glass
composition with remarkable properties covers
transmission from 7.5 to 14μm IR range with the best
optical quality.
This housing is constructed from aluminium. Its
weatherproof feature is ensured by the extruded
aluminium sunshield, the EPDM-rubber end-gasket
between the end-cover plates and the body, and
three cable glands with their specific gaskets. The
installation and adjustment of the camera are made
easier due to the ability to remove the body, leaving
the internal slide in working position for an easy
operation.
Available accessories: sunshield, heater kit, camera
power supply, weatherproof junction box, wiper
and washer. These accessories are supplied as a
simple plug-in kit for an easy installation. It can be
installed with cable sheaths, instead of regular cable
glands using the junction box for the wiring harness.
The HTG housing can be utilized for a variety of
applications and it can be coupled with the Pan & Tilt
PTH900 series.
4.2 Product markings
See the label attached to the outside of the package.