Lyndex-Nikken Shrink Fit Machine Instructions User Manual
Page 7
ELCO
Shrink fit unit Start.2
27/04/2010
Page 7/19
2.2
Pictograms
The following pictograms are used in order to prevent the following risks :
people with a pace maker or active implant are not allowed to use the
unit ; passive implants are not concerned.
ISM unit (scientific and medical industrial units) group II class A according
to EN55011, output frequency 19kHz-30kHz. Don’t install near equipment sensitive to
electromagnetics fields
Burns can be provoked, presence of hot tools
Wearing gloves is compulsory, presence of hot and cutting tools
2.3
Information to operators
The unit shall only be used for the purpose of its conception, which is shrinking and
unshrinking steel and carbide cutting tools into steel attachments dedicated to that
operation and recommended by the manufacturer.
Any other use can present some risks and will not be guaranteed by the manufacturer.
Every user must read carefully this instruction in order to know the unit functioning, the
shrinking and unshrinking modus operandi as well as the security instructions.
Any intervention on the unit by persons other than the manufacturer, during the
warranty time is forbidden. Any intervention, even partly, will put an end to the
manufacturer’s warranty. Possible interventions on the unit by the manufacturer will be
charged to the user.