LBL Lighting KENDALL - Manual

G P I : ENERAL RODUCT NFORMATION
This product is suitable for damp locations.
This product can be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
Installation Instructions for
1
L 793_ P
980KENDP
Screw the lamp into the socket.
Use Type T9 Classic Edison MAX 75 Watt
E26 base incandescent lamp.
Install the Lamp
C AUTION: To reduce the risk of a burn or electric
shock during relamping, disconnect the power to
the fixture.
Install the Shade
Feed the cord, stem, socket, and lamp through the
shade.
Gently lower the shade until it rests properly on the
stopper.
SOCKET
SHADE
Kendall Pendant
Pendant
1.0
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
1
2
1
1A 2A CORD
STEM
SOCKET
LAMP
LAMP
STOPPER