LBL Lighting MILO S User Manual
Milo suspension, Install the mounting plate
1
Install the Mounting Plate
Installation Instructions for
Milo Suspension
980MILOS
G
P
I
:
ENERAL
RODUCT NFORMATION
This product is suitable for damp locations.
This product can be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
Suspension
1.0
SU784_2D
1A
#8-32
SCREW
MOUNTING
PLATE
Mount the mounting plate assembly to the electrical box
with the two provided #8-32 screws.
1B
2
2
2
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
Remove the mounting plate from the canopy by completely
unscrewing the mounting plate from the strain relief.
2
STRAIN RELIEF
3
1
STRAIN RELIEF
CANOPY
1
MOUNTING
PLATE