LBL Lighting Mason Classic - Manual

1
G P I : ENERAL RODUCT NFORMATION
This product is suitable for damp locations.
This product can be dimmed with a standard incandescent
dimmer.
Screw the lamp base completely into the socket.
Use Type T9 Classic Edison
MAX 30 Watt
E26 base incandescent lamp.
A 30 Watt lamp is included with the fixture.
Installation Instructions for
Mason Classic
1.1 LF573_2D75
980MASONCSP
Install the Lamp
CAUTION:To reduce the risk of a burn or electric shock
during relamping, disconnect the power to the fixture.
Suspension
1A
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
1
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2014 LBL Lighting.All rights reserved.The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company