LBL Lighting Monty SP - Manual

1
Installation Instructions for
Monty
1.2 LF935_SC2D100
980MONTYSP
G P I : ENERAL RODUCT NFORMATION
This product can mount to either a 4" square electrical box with
round plaster ring or an octagon electrical box.
This product is suitable for dry locations only.
This product can be dimmed with a standard incandescent dimmer.
Suspension
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
Use Volt, Watt Type A19
MAX 100
120
Medium Base Lamp.
Install the lamp
Carefully lift up glass shade up to expose the socket.
CAUTION:To reduce the risk of a burn or electric shock
during relamping, disconnect the power to the fixture.
Screw the lamp completely into the socket.
Carefully lower the glass shade onto the conical connector.
GLASS SHADE
LAMP
SOCKET
CONICAL CONNECTOR
1A 1B
1 2
3
3
2