LBL Lighting Drop SP - Manual

1
Installation Instructions for
Drop
1.0 LF5490_2D100
980DROPSP
G P I : ENERAL RODUCT NFORMATION
This product can mount to either a 4" square electrical box with
round plaster ring or an octagon electrical box.
This product is suitable for indoor dry locations only.
This product can be dimmed with a standard incandescent dimmer.
Install the Lamp
LAMP
SOCKET
Use Volt, Watt Type A19
MAX 100
120
Medium Base Lamp.
CAUTION:To reduce the risk of a burn or electric shock
during relamping, disconnect the power to the fixture.
Screw the lamp completely into the socket.
Refer to the instructions provided with the canopy to install
the fixture.
Suspension
1A
11
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
2
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2014 LBL Lighting.All rights reserved.The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company