LBL Lighting Calix 7-Light - Manual

Installation Instructions for
Calix 7-Light Suspension (LED)
1.0
980CALIX7S
Suspension
SU768_
G P I : ENERAL RODUCT NFORMATION
This product is suitable for damp locations.
This product may be dimmed with a low-voltage electronic dimmer.
1
1A
Determine the desired location fixture and center the canopy to the electrical box.
Ensure that the power cord port will be aligned with the canopy’s thumb screw and the locations of the two aircraft cable
posts as illustrated above.
While ensuring that the fixture’s location is aligned accordingly, make two aircraft cable post location marks 10.625” away
from the center of the power cord post.
1
Install the Fixture
AIRCRAFT CABLE POST LOCATION AIRCRAFT CABLE POST LOCATION
THUMB SCREW POWER CORD POST
10.625” 10.625”
2
3
1B
7 4 Tap the anchor at the marked point up to the threaded portion with a hammer.
Screw the anchor in the rest of the way with a Phillips screwdriver.
ANCHOR
CEILING
5
4
7 5
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.