LBL Lighting Bling Chandelier - Manual

Installation Instructions for
Bling Chandelier 1.1 HS524_
980BLINGCH
Fusion Jack™
1
GENERAL PRODUCT INFORMATION:
This product is suitable only for indoor dry locations
and approved for use at any height above the finished floor.
Read through all the instructions before attempting installation.
1A
SCREWS
CANOPY
Remove all four screws from the sides of the canopy. 1
1B
CANOPY
Lift the backplate out of the canopy. 2
BACKPLATE
Mount the Backplate
1D
BACKPLATE
Mark the ceiling in the center of the backplate end holes.
Remove the backplate from the ceiling.
4
1C
BACKPLATE
ELECTRICAL BOX
SCREW SCREW
Line up the canopy as desired and mount the backplate to the
electrical box with the two #8-32 button-head screws provided.
3
END HOLE
5
CAUTION - RISK OF FIRE
This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and DISCONNECT POWER TO THE
ELECTRICAL BOX.
1 1
3 3