LBL Lighting Mezzo 3-Light S User Manual
Mezzo 3-light suspension, Install the mounting plate
1
Install the Mounting Plate
Installation Instructions for
Mezzo 3-Light Suspension
980MEZZO3S
G
P
I
:
ENERAL
RODUCT NFORMATION
This product is suitable for damp locations.
This product can be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
Suspension
1.0
S 7723_
U
1A
1
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
CAP NUT
THREADED
STUD
MOUNTING
PLATE
2
Remove the mounting plate from the canopy by
unscrewing the two cap nuts from the two threaded
studs.
2
1B
MOUNTING
PLATE
Mount the mounting plate to the electrical box with
the two #8-32 screws.
#8-32 SCREW
2
#8-32 SCREW
ELECTRICAL BOX
2
CANOPY