LBL Lighting Constellation Chandelier - Manual

Installation Instructions for
Constellation Chandelier 1.1 HS513_
980CONSTCH
1
G P I : ENERAL RODUCT NFORMATION
This product is suitable only for dry locations
and approved for use at any height above the finished floor.
This product can be dimmed with a low-voltage electronic dimmer.
Read through all the instructions before attempting installation.
Remove all six screws from the sides of the canopy.
Lift the backplate out of the canopy.
BACKPLATE
Mount the Backplate
BACKPLATE
ELECTRICAL BOX
SCREW SCREW
Feed the power line wires through the center hole of the
backplate.
Mount the backplate to the electrical box with the two #8-32
button-head screws provided.
CANOPY
SCREWS
POWER
LINE
WIRES
Fusion Jack
™
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
1A
1
1B
2
3
4
1C
3
4