LBL Lighting Rock Candy 8-Light Chandelier CH - Manual

1
Installation Instructions for
Rock Candy 5 and 8 Light Suspension
980ROCKCCH
CAUTION - RISK OF FIRE
This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and TURN THE POWER TO THE
ELECTRICAL BOX OFF.
Install Lamps and Shades
G P I : ENERAL RODUCT NFORMATION
This product is suitable for damp locations.
This product can mount either to a 4” square electrical box with a
round plaster ring or an octagon electrical box.
This product can be dimmed with a standard incandescent dimmer.
This instruction shows a typical instruction.
1.0
SUSPENSION
1A
SU6235_
SU6238_
1B
INNER
GLASS
SHADE
SOCKET
ASSEMBLY
BASE
Gently push the inner glass shade into the center of the
socket assembly base until it is firmly in place. 2
Push the lamp base completely into the socket.
CAUTION: To reduce the risk of a burn or electric
shock during relamping, disconnect the power to
the fixture.
LAMP
SOCKET
NOTE: Use only your fingers and a soft cloth to
replace the lamp.
Use Volt, type T4, G9 base MAX 60 120 Watt
bi-pin halogen lamp in each socket.
1
NOTE: Opal version does not have an inner
glass.
C AUTION: Due to the fixture’s weight,
assistance will be needed for installation.