LBL Lighting Veneto SP - Manual

Installation Instructions for
Veneto Suspension 1.6 HS317_2J150
980VENETSP
G P I : ENERAL RODUCT NFORMATION
This product can mount to either a 4" square electrical box with
round plaster ring or an octagon electrical box.
This product is suitable for damp locations.
This product can be dimmed with a standard incandescent dimmer.
1
SCREW ALLEN
WRENCH
Separate the crossbar from the canopy by removing all
four screws with the Allen wrench provided.
Mount the crossbar to the electrical box with the two
#8-32 screws provided.
#8-32 SCREW
CROSSBAR
ASSEMBLY
Install the Cross Bar
NOTE: This canopy may be installed to sloped
ceilings with
. MAX 45
° tilt
Suspension
1B 1A
1 1
2
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.