LBL Lighting Veneto Grande SPCF - Manual

1
Installation Instructions for
Veneto Grande Suspension (Compact Fluorescent) 1.3 PF318_326
980VENETGSPCF
GENERAL PRODUCT INFORMATION:
This product can mount to either a 4" square electrical box with
round plaster ring or an octagon electrical box.
This product is suitable for indoor dry locations only.
CAUTION - RISK OF FIRE
This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and TURN THE POWER TO THE
ELECTRICAL BOX OFF.
Suspension
Adjust the Fixture Height
1A
NOTE: Use a 24" extension stem for the minimum 32"
overall height. To extend the fixture height to 44", or 56",
or 68", use the additional 12", or 24", or combination of
12" and 24" provided extension stems respectively. The
extension stems are not field cuttable.
To combine the extension stems, simply tighten one extension
stem threaded nipple completely to the back of the other
extension stem.
1
EXTENSION STEM
THREADED NIPPLE 1
EXTENSION STEM
1B
Loosen (Do Not Remove) the top M3 set screw on the
bushing with the provided 1.5MM Allen wrench.
2
BUSHING
1.5MM ALLEN
WRENCH
M3 SET SCREW
2