LBL Lighting Veneto Venti SPCF - Manual

1
G P I : ENERAL RODUCT NFORMATION
This product can mount to either a 4" square electrical box with
round plaster ring or an octagon electrical box.
This product is suitable for indoor dry locations only.
Installation Instructions for
Veneto Venti (Compact Fluorescent) 1.1 PF400_326
980VENETVSPCF
SCREW ALLEN
WRENCH
Separate the crossbar from the canopy by removing all
four screws with the Allen wrench provided.
Mount the crossbar to the electrical box with the two
#8-32 screws provided.
#8-32 SCREW
CROSSBAR
ASSEMBLY
Install the Crossbar
NOTE: This canopy may be installed to sloped
ceilings with
. MAX 45
° tilt
Suspension
1B 1A
1 1
2
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.